Lantronix Switch 900-510 Manuale Utente

Part Number 900-510 Revision C October 2013 SLB™ Branch Office Manager User Guide

SLB™ Branch Office Manager User Guide 10 1: About This Guide Purpose and Audience This guide provides the information needed to install, confi

8: Device Ports SLB™ Branch Office Manager User Guide 100 Sylog Logging Data can be logged to the system log. If this feature is enabled, the data

8: Device Ports SLB™ Branch Office Manager User Guide 101 Email/SNMP Traps Email/Traps Select the checkbox to enable email and SNMP logging. Email

8: Device Ports SLB™ Branch Office Manager User Guide 102 Text String The specific pattern of characters the SLB branch office manager must recogni

8: Device Ports SLB™ Branch Office Manager User Guide 103 PC Card Logging PC Card Logging Select to enable PC Card logging. A PC Card Compact Flash

8: Device Ports SLB™ Branch Office Manager User Guide 104 emailrestart <Restart Delay> emailsend <email|trap|both> emailstring <Rege

8: Device Ports SLB™ Branch Office Manager User Guide 105 2. Change the following as desired: Baud The speed with which the device port exchanges

8: Device Ports SLB™ Branch Office Manager User Guide 106 To configure console port settings: set consoleport <one or more parameters> Param

8: Device Ports SLB™ Branch Office Manager User Guide 107 2. Enter the following: Switching Delay Number of milliseconds the SLB branch office ma

8: Device Ports SLB™ Branch Office Manager User Guide 108 should be on, off, or returned to the state it was in before the reboot. Default is Off.

8: Device Ports SLB™ Branch Office Manager User Guide 109 2. Enter the following: Note: To clear fields in the lower part of the page, click the

1: About This Guide SLB™ Branch Office Manager User Guide 11 Chapter Summary 12: Maintenance and Operation Provides instructions for upgrading fir

8: Device Ports SLB™ Branch Office Manager User Guide 110 Escape Sequence The escape character used to get the attention of the SSH or Telnet clie

8: Device Ports SLB™ Branch Office Manager User Guide 111 To view or update a host list: 1. In the Host Lists table, select the host list and clic

8: Device Ports SLB™ Branch Office Manager User Guide 112 Escape Sequence The escape character used to get the attention of the SSH or Telnet clie

8: Device Ports SLB™ Branch Office Manager User Guide 113 To add a new host entry to a list or edit an existing entry: set hostlist add|edit <Ho

SLB™ Branch Office Manager User Guide 114 9: PC Cards You can use the PC Card page to configure storage (Compact Flash) and modem/ISDN PC card

9: PC Cards SLB™ Branch Office Manager User Guide 115 4. Enter the following settings for the selected PC Card: Storage Settings Mount Select th

9: PC Cards SLB™ Branch Office Manager User Guide 116 Filesystem Select ext2 or FAT, the file systems the SLB device supports. 5. Click the Appl

9: PC Cards SLB™ Branch Office Manager User Guide 117 4. Enter or view the following: State Select to indicate whether to disable the PC Card o

9: PC Cards SLB™ Branch Office Manager User Guide 118 Mode The format in which the data flows back and forth. With Text selected, the SLB branch of

9: PC Cards SLB™ Branch Office Manager User Guide 119 Parity Parity checking is a rudimentary method of detecting simple, single-bit errors. From t

SLB™ Branch Office Manager User Guide 12 2: Overview The SLB branch office manager enables IT System Administrators to manage remote servers a

9: PC Cards SLB™ Branch Office Manager User Guide 120 Negotiated IP IP address associated with the GPRS connection. Text Mode Timeout Logins If you

9: PC Cards SLB™ Branch Office Manager User Guide 121 DOD Authentication Enables PAP or CHAP authentication for dial-in & dial-on-demand. PAP i

9: PC Cards SLB™ Branch Office Manager User Guide 122 TCP Port The TCP (raw) session port number to use if you selected TCP. Defaults: Upper PC Car

9: PC Cards SLB™ Branch Office Manager User Guide 123 Removes a file on a Compact Flash card: pccard storage delete <upper|lower> file <Cu

9: PC Cards SLB™ Branch Office Manager User Guide 124 modemmode <text|ppp> modemstate <disable|dialout|dialin|dialback|dialondemand| diali

SLB™ Branch Office Manager User Guide 125 10: Connections Chapter 8: Device Ports described how to configure and interact with an SLB branch o

10: Connections SLB™ Branch Office Manager User Guide 126 VT100 Terminals SLB Branch Office Manager Server Typical Setup Scenarios for the SLB Dev

10: Connections SLB™ Branch Office Manager User Guide 127 SLB Branch Office Manager Reverse Terminal Server In this scenario, the SLB branch off

10: Connections SLB™ Branch Office Manager User Guide 128 Modem Settings section of the Device Ports – Settings web page. A user could then dial in

10: Connections SLB™ Branch Office Manager User Guide 129 Connection Configuration To create a connection: 1. Click the Devices tab and select th

2: Overview SLB™ Branch Office Manager User Guide 13 Meets Needs of Branch Offices Designed to meet the specific needs of the remote branch offi

10: Connections SLB™ Branch Office Manager User Guide 130 to From the drop-down list, select a destination for the connection: a device port connec

10: Connections SLB™ Branch Office Manager User Guide 131 To view, update, or disconnect a current connection: The bottom of the Connections web pa

10: Connections SLB™ Branch Office Manager User Guide 132 To monitor a device port: connect listen deviceport <Device Port # or Name> To conn

10: Connections SLB™ Branch Office Manager User Guide 133 ssh <IP Address or Name> [port <TCP Port] >] <SSH flags>] where

SLB™ Branch Office Manager User Guide 134 11: User Authentication Users who attempt to log in to the SLB branch office manager by means of Tel

11: User Authentication SLB™ Branch Office Manager User Guide 135 2. To enable a method currently in the Disabled methods list, select the method

11: User Authentication SLB™ Branch Office Manager User Guide 136 TACACS+ (Terminal Access Controller Access Control System) TACACS+ allows a remot

11: User Authentication SLB™ Branch Office Manager User Guide 137 Local and Remote Users The system administrator can configure the SLB device to u

11: User Authentication SLB™ Branch Office Manager User Guide 138 Local User Passwords Complex Passwords Select to enable the SLB branch office man

11: User Authentication SLB™ Branch Office Manager User Guide 139 2. Enter the following information for the user: Login User ID of selected user

2: Overview SLB™ Branch Office Manager User Guide 14 Typical Equipment You can configure, administer, and manage IT equipment in a variety of ways,

11: User Authentication SLB™ Branch Office Manager User Guide 140 Access Outlets The outlets the user may monitor and configure. Enable for Dial-b

11: User Authentication SLB™ Branch Office Manager User Guide 141 3. Assign rights to users. Each user is a member of a group that has a predefine

11: User Authentication SLB™ Branch Office Manager User Guide 142 5. Click the Back to Local/Remote Users link to return to the Local/Remote User

11: User Authentication SLB™ Branch Office Manager User Guide 143 Local Users Commands The following CLI commands correspond to the web page entrie

11: User Authentication SLB™ Branch Office Manager User Guide 144 To view settings for all users or a local user: show localusers [user <User Lo

11: User Authentication SLB™ Branch Office Manager User Guide 145 To configure attributes for users who log in by a remote authentication method: s

11: User Authentication SLB™ Branch Office Manager User Guide 146 2. Enter the following: Enable NIS Displays selected if you enabled this method

11: User Authentication SLB™ Branch Office Manager User Guide 147 Custom Menu If custom menus have been created you can assign a default custom me

11: User Authentication SLB™ Branch Office Manager User Guide 148 Secure Lantronix Network Right to view and manage secure IT management units (e.g

11: User Authentication SLB™ Branch Office Manager User Guide 149 To configure the SLB branch office manager to use NIS to authenticate users who l

2: Overview SLB™ Branch Office Manager User Guide 15 The SLB device also provides features such as convenient text menu systems, break-safe operati

11: User Authentication SLB™ Branch Office Manager User Guide 150 LDAP allows SLB users to authenticate using a wide variety of LDAP servers, such

11: User Authentication SLB™ Branch Office Manager User Guide 151 Base The name of the LDAP search base (e.g., dc=company, dc=com). May have up to

11: User Authentication SLB™ Branch Office Manager User Guide 152 Group Select the group to which the LDAP users will belong: Default Users: This g

11: User Authentication SLB™ Branch Office Manager User Guide 153 LDAP Commands These commands for the command line interface correspond to the web

11: User Authentication SLB™ Branch Office Manager User Guide 154 RADIUS The system administrator can configure the SLB branch office manager to us

11: User Authentication SLB™ Branch Office Manager User Guide 155 Enable RADIUS Displays selected if you enabled this method on the User Authentica

11: User Authentication SLB™ Branch Office Manager User Guide 156 Break Sequence A series of 1-10 characters users can enter on the command line in

11: User Authentication SLB™ Branch Office Manager User Guide 157 Reboot & Shutdown Right to use the CLI or shut down the SLB branch office man

11: User Authentication SLB™ Branch Office Manager User Guide 158 To set user group and permissions for RADIUS users: set radius group <default|

11: User Authentication SLB™ Branch Office Manager User Guide 159 2. Enter the following: Enable Kerberos Displays selected if you enabled this

2: Overview SLB™ Branch Office Manager User Guide 16 Figure 2-1. SLB 8 Front Figure 2-2. SLB 8 Back — 8 Device Ports, 4 Power Outlets, 8 Switch

11: User Authentication SLB™ Branch Office Manager User Guide 160 KDC IP Address Enter the IP address of the Key Distribution Center (KDC). KDC Po

11: User Authentication SLB™ Branch Office Manager User Guide 161 Full Administrative Right to add, update, and delete all editable fields. Network

11: User Authentication SLB™ Branch Office Manager User Guide 162 PC Card Right to enter modem settings for PC cards. Power Outlets Right to confi

11: User Authentication SLB™ Branch Office Manager User Guide 163 To view Kerberos settings: show kerberos TACACS+ Similar to RADIUS, the main fu

11: User Authentication SLB™ Branch Office Manager User Guide 164 2. Enter the following: Enable TACACS+ Displays selected if you enabled this met

11: User Authentication SLB™ Branch Office Manager User Guide 165 Group Select the group to which the TACACS+ users will belong: Default Users: Thi

11: User Authentication SLB™ Branch Office Manager User Guide 166 TACACS+ Commands These commands for the command line interface correspond to the

11: User Authentication SLB™ Branch Office Manager User Guide 167 not used, a user can access multiple hosts without entering a password. In either

11: User Authentication SLB™ Branch Office Manager User Guide 168 2. Enter the following: Imported Keys (SSH In) Host & User Associated with

11: User Authentication SLB™ Branch Office Manager User Guide 169 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAEEApUHCX9EWsHt+jmUGXa1YC3us ABYxIXUhSU1N+NU9HNa

2: Overview SLB™ Branch Office Manager User Guide 17 Protocols Supported The SLB branch office manager supports the TCP/IP network protocol as well

11: User Authentication SLB™ Branch Office Manager User Guide 170 Host and Login for Export Export via Select the method (SCP, FTP, or Cut and Pas

11: User Authentication SLB™ Branch Office Manager User Guide 171 2. View or enter the following: Reset to Default Host Key Select the All Keys c

11: User Authentication SLB™ Branch Office Manager User Guide 172 Public Key Filename Filename of the public host key. Private Key Filename Filena

11: User Authentication SLB™ Branch Office Manager User Guide 173 To export a key: set sshkey export <ftp|scp|copypaste> <one or more para

11: User Authentication SLB™ Branch Office Manager User Guide 174 To display SSH keys that have been imported: show sshkey import <one or more p

11: User Authentication SLB™ Branch Office Manager User Guide 175  Maximum of five nested menus can be called.  No syntax checking (Enter each

11: User Authentication SLB™ Branch Office Manager User Guide 176 Example The system administrator creates two custom user menus, with menu1 having

11: User Authentication SLB™ Branch Office Manager User Guide 177 __Custom User Menus___________________________________________________________ Me

11: User Authentication SLB™ Branch Office Manager User Guide 178 Menu1 Title -------------------------------------

SLB™ Branch Office Manager User Guide 179 12: Maintenance and Operation The system administrator performs maintenance activities and operates

2: Overview SLB™ Branch Office Manager User Guide 18 Application Example The figure below is an example deployment. An SLB branch office manager is

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 180 2. Enter the following: General Reboot Select this option to reboot the S

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 181 Login Banner The text to display on the command line interface after the us

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 182 Boot Banks Bank 1 Version of SLB firmware in bank 1. Note: The word "

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 183 Location for Save, Restore, or Manage If you selected to save or restore a

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 184 2. To delete files, select one or more files and click the Delete button.

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 185 2. If desired, enter the following: Reset to Default Certificate To reset

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 186 iGoogle Gadgets You can create an iGoogle gadgets that enables you to view

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 187 Administrative Commands These commands for the command line interface corr

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 188 To enable or disable iGoogle Gadget web content: admin web gadget <enabl

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 189 To view keypad settings: admin keypad show To set the FTP/TFTP/SFTP server

2: Overview SLB™ Branch Office Manager User Guide 19 A system administrator, upon losing IP connectivity to a server, takes the following steps: 

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 190 To delete a saved configuration: admin config delete <Config Name> lo

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 191 2. Enter the following: Log Select the type(s) of log you want to view. L

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 192 4. To email the system log to an individual: a) In the Comment field, en

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 193 System Log Command The following command for the command line interface cor

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 194 2. To select a sort option (by Date/Time, User, Command/Action, click the

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 195 2. Enter the following: Select Diagnostics Select one or more diagnostic

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 196 Send Packet This option sends an Ethernet packet out one of the Ethernet po

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 197 4. To view a report, click the link for that report. 5. To email the re

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 198 Diagnostic Commands The following CLI commands correspond to the web page e

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 199 To generate and send Ethernet packets: diag sendpacket host <IP Address

SLB™ Branch Office Manager User Guide 2 Copyright & Trademark © 2013 Lantronix, Inc. All rights reserved. No part of the contents of this book

2: Overview SLB™ Branch Office Manager User Guide 20 2 The max input/output current is de-rated to 16A when using the optional NEMA 5-20P (20A) cab

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 200 The top half of the page displays the status of each port, power supply, a

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 201 4. To view a report, click the link for that report. 5. To email the rep

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 202 Status Commands These commands for the command line interface correspond to

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 203 2. Enter the following: Event Trigger From the drop-down list, select the

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 204 SNMP Trap OID Enter a unique identifier for an SNMP object. (An SNMP object

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 205 To update event definitions: admin events edit <Event ID> <paramet

SLB™ Branch Office Manager User Guide 206 13: Application Examples Each SLB branch office manager has multiple serial ports and two network po

13: Application Examples SLB™ Branch Office Manager User Guide 207 Telnet/SSH to a Remote Device The following figure shows a Sun server connected

13: Application Examples SLB™ Branch Office Manager User Guide 208 3. Connect to the device port: [SLB]> connect direct deviceport 2 4. View m

13: Application Examples SLB™ Branch Office Manager User Guide 209 [SLB]> 2. Configure the device port that is connected to the console port o

2: Overview SLB™ Branch Office Manager User Guide 21 Network Connections The SLB network interfaces are 10Base-T/100Base-TX connectors for use with

13: Application Examples SLB™ Branch Office Manager User Guide 210 Local Serial Connection to Network Device via Telnet This example shows a termin

13: Application Examples SLB™ Branch Office Manager User Guide 211 Byte Threshold: 100 Max number of files: 10 Email Delay: 60 secon

SLB™ Branch Office Manager User Guide 212 14: Command Reference After an introduction to using commands, this chapter lists and describes all

14: Command Reference SLB™ Branch Office Manager User Guide 213 Table 14-1. Actions and Category Options Action Category set network | ipfilter |

14: Command Reference SLB™ Branch Office Manager User Guide 214  Use the up and down arrows to scroll through previously entered commands. If des

14: Command Reference SLB™ Branch Office Manager User Guide 215 admin config delete Syntax admin config delete <Config Name> location <def

14: Command Reference SLB™ Branch Office Manager User Guide 216 Description Saves the current SLB configuration to a selected location. admin confi

14: Command Reference SLB™ Branch Office Manager User Guide 217 admin ftp password Syntax admin ftp password Description Sets the FTP server passwo

14: Command Reference SLB™ Branch Office Manager User Guide 218 Description Displays keypad settings. admin lcd reset Syntax admin lcd reset Descri

14: Command Reference SLB™ Branch Office Manager User Guide 219 admin web certificate Syntax admin web certificate import via <sftp|scp> cert

SLB™ Branch Office Manager User Guide 22 3: Installation This chapter provides a high-level procedure for installing the SLB branch office man

14: Command Reference SLB™ Branch Office Manager User Guide 220 admin web terminate Syntax admin web terminate <Session ID> Description Termi

14: Command Reference SLB™ Branch Office Manager User Guide 221 Local Users authentication is always the first method used. Any methods omitted fro

14: Command Reference SLB™ Branch Office Manager User Guide 222 Description Configures the SLB branch office manager to use Kerberos to authenticat

14: Command Reference SLB™ Branch Office Manager User Guide 223 show ldap Description Displays LDAP settings: Syntax show ldap Local Users Commands

14: Command Reference SLB™ Branch Office Manager User Guide 224 set localusers allowreuse Syntax set localusers allowreuse <enable|disable> D

14: Command Reference SLB™ Branch Office Manager User Guide 225 set localusers password Syntax set localusers password <User Login> Descripti

14: Command Reference SLB™ Branch Office Manager User Guide 226 NIS Commands set nis Syntax set nis <one or more parameters> Parameters acces

14: Command Reference SLB™ Branch Office Manager User Guide 227 RADIUS Commands set radius Syntax set radius <one or more parameters> Paramet

14: Command Reference SLB™ Branch Office Manager User Guide 228 TACACS+ Commands set tacacs+ Syntax set tacacs+ <one or more parameters> Para

14: Command Reference SLB™ Branch Office Manager User Guide 229 Description Adds a local user to a user group or changes the group the user belongs

3: Installation SLB™ Branch Office Manager User Guide 23 Verify and inspect the contents of the SLB package using the enclosed packing slip or the

14: Command Reference SLB™ Branch Office Manager User Guide 230 where <Permission List> is one or more of nt, sv, dt, lu, ra, sk, um, dp, pc

14: Command Reference SLB™ Branch Office Manager User Guide 231 Description Sets permissions not already defined by the assigned permissions group.

14: Command Reference SLB™ Branch Office Manager User Guide 232 Description Allow (unlock) a user’s ability to log in. show cli Syntax show cli Des

14: Command Reference SLB™ Branch Office Manager User Guide 233 charxfer <toendpoint|fromendpoint> date <MMDDYYhhmm[ss]> deviceport <

14: Command Reference SLB™ Branch Office Manager User Guide 234 connect global outgoingtimeout Syntax connect global outgoingtimeout <disable|1-

14: Command Reference SLB™ Branch Office Manager User Guide 235 telnet <IP Address or Name> [port <TCP Port] trigger <now|datetime|char

14: Command Reference SLB™ Branch Office Manager User Guide 236 Description Configures console port settings. show consoleport Syntax show consolep

14: Command Reference SLB™ Branch Office Manager User Guide 237 title <Menu Title> Description Changes a command within an existing custom us

14: Command Reference SLB™ Branch Office Manager User Guide 238 show datetime Syntax show datetime Description Displays the local date, time, and t

14: Command Reference SLB™ Branch Office Manager User Guide 239 slp outletcontrol state <on|off|cyclepower> [outlet <Outlet #>][tower &

3: Installation SLB™ Branch Office Manager User Guide 24 Relative Humidity Operating: 10% to 90% non-condensing Storage: 10% to 90% non-condensing

14: Command Reference SLB™ Branch Office Manager User Guide 240 calleridcmd <Modem Command String> calleridlogging <enable| disable> ch

14: Command Reference SLB™ Branch Office Manager User Guide 241 remoteipaddr <negotiate|IP Address> restartdelay <PPP Restart Delay> sl

14: Command Reference SLB™ Branch Office Manager User Guide 242 Description Displays a list of all device port names. show deviceport port Syntax s

14: Command Reference SLB™ Branch Office Manager User Guide 243 diag internals Syntax diag internals Description Displays information on the intern

14: Command Reference SLB™ Branch Office Manager User Guide 244 xferdatasize <Size In Kbytes to Transfer> Default is 1 Kbyte. Description Te

14: Command Reference SLB™ Branch Office Manager User Guide 245 Events Commands admin events add Syntax admin events add <receivetrap> <re

14: Command Reference SLB™ Branch Office Manager User Guide 246 admin events show Syntax admin events show Description Displays event definitions.

14: Command Reference SLB™ Branch Office Manager User Guide 247 set hostlist delete Syntax set hostlist delete <Host List> [entry <Host N

14: Command Reference SLB™ Branch Office Manager User Guide 248 edit <Ruleset Name> <Edit Parameters> Edit Parameters: append insert &

14: Command Reference SLB™ Branch Office Manager User Guide 249 sysloglogging <enable|disable> Description Configures logging settings for on

3: Installation SLB™ Branch Office Manager User Guide 25 Connecting to a Device Port You can connect any device that has a serial console port to a

14: Command Reference SLB™ Branch Office Manager User Guide 250 set network dns Syntax set network dns <1|2|3> ipaddr <IP Address> Desc

14: Command Reference SLB™ Branch Office Manager User Guide 251 show network dns Syntax show network dns Description Displays DNS settings. show ne

14: Command Reference SLB™ Branch Office Manager User Guide 252 mount <enable|disable> remdir <Remote NFS Directory> rw <enable|disa

14: Command Reference SLB™ Branch Office Manager User Guide 253 show nfs Syntax show nfs Description Displays NFS share settings. PC Card Storage C

14: Command Reference SLB™ Branch Office Manager User Guide 254 PC Card Modem Commands pccard modem Syntax pccard modem <upper|lower> <par

14: Command Reference SLB™ Branch Office Manager User Guide 255 remoteipaddr <negotiate|IP Address> restartdelay <PPP Restart Delay> se

14: Command Reference SLB™ Branch Office Manager User Guide 256 set power switchingdelay Syntax set power switchingdelay <Delay in msec> Desc

14: Command Reference SLB™ Branch Office Manager User Guide 257 Services Commands set services Syntax set services <one or more services paramet

14: Command Reference SLB™ Branch Office Manager User Guide 258 trapcommunity <Trap Community> v1ssh <enable|disable> v3password <Pa

14: Command Reference SLB™ Branch Office Manager User Guide 259 show slcnetwork Syntax show slcnetwork [ipaddrlist <all|Address Mask>] Descri

3: Installation SLB™ Branch Office Manager User Guide 26 see D: Adapters and Pinouts and our web site at www.lantronix.com/support and click Cable

14: Command Reference SLB™ Branch Office Manager User Guide 260 [path <Path to Copy Key>] bits <512|1024> keyname <SSH Key Name>

14: Command Reference SLB™ Branch Office Manager User Guide 261 Parameters [keyhost <SSH Key IP Address or Name>] [keyuser <SSH Key User&g

14: Command Reference SLB™ Branch Office Manager User Guide 262 Description Provides details, for example, endpoint parameters and trigger, for a s

14: Command Reference SLB™ Branch Office Manager User Guide 263 level <error|warning|info|debug> log <all|netlog|servlog|authlog|devlog|di

SLB™ Branch Office Manager User Guide 264 A: Bootloader The SLM management appliance provides a bootload command interface. This interface is

A: Bootloader SLB™ Branch Office Manager User Guide 265 Displays information about the current user. Administrator Commands In addition to the com

SLB™ Branch Office Manager User Guide 266 B: Security Considerations The SLB branch office manager provides data path security by means of SSH

SLB™ Branch Office Manager User Guide 267 C: Safety Information Safety Precautions Please follow the safety precautions described below when i

C: Safety Information SLB™ Branch Office Manager User Guide 268 − Install only in restricted access areas (dedicated equipment rooms, equipment clo

SLB™ Branch Office Manager User Guide 269 D: Adapters and Pinouts The serial device ports of the SLB branch office manager products match the

3: Installation SLB™ Branch Office Manager User Guide 27 The status of the power outlets displays on the front panel LCD display as the default dis

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 270 RJ45 Receptacle to DB25M DCE Adapter for the SLB Device (PN 200.2066A)

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 271 RJ45 Receptacle to DB25F DCE Adapter for the SLB Device (PN 200.2067A) 5 6

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 272 RJ45 Receptacle to DB9M DCE Adapter for the SLB Device (PN 200.2069A) 8 6 5

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 273 RJ45 Receptacle to DB9F DCE Adapter for the SLB Device (PN 200.2070A)

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 274 RJ45 to RJ45 Adapter for Netra/Sun/Cisco and SLP Device (PNs 200.2225 and ADP0101

SLB™ Branch Office Manager User Guide 275 E: Protocol Glossary BOOTP (Bootstrap Protocol) Similar to DHCP, but for smaller networks. Automatic

E: Protocol Glossary SLB™ Branch Office Manager User Guide 276 NMS (Network Management System) NMS acts as a central server, requesting and receivi

E: Protocol Glossary SLB™ Branch Office Manager User Guide 277 TACACS+ (Terminal Access Controller Access Control System) A method of authenticatio

SLB™ Branch Office Manager User Guide 278 F: Compliance Information Manufacturer’s Name & Address: Lantronix, Inc., 167 Technology Drive,

F: Compliance Information SLB™ Branch Office Manager User Guide 279 • EN 55022 — “Limits and Methods of Measurement of Radio Interference Characte

3: Installation SLB™ Branch Office Manager User Guide 28 Figure 3-4. SLB Installation Using the Integrated Ethernet Switch In Figure 3-5, the SLB

F: Compliance Information SLB™ Branch Office Manager User Guide 280 RoHS Notice: All Lantronix products in the following families are China RoHS-

SLB™ Branch Office Manager User Guide 29 4: Quick Setup This chapter helps get the IP network port up and running quickly, so you can administ

SLB™ Branch Office Manager User Guide 3 Disclaimer & Revisions Operation of this equipment in a residential area is likely to cause interferen

4: Quick Setup SLB™ Branch Office Manager User Guide 30 Method Description Front panel LCD display and pushbuttons You manually assign the IP addre

4: Quick Setup SLB™ Branch Office Manager User Guide 31 Note: Have your information handy as the display times out without accepting any unsaved ch

4: Quick Setup SLB™ Branch Office Manager User Guide 32 Note: If you have connected Eth1 to the network, and Eth1 is able to acquire an IP address

4: Quick Setup SLB™ Branch Office Manager User Guide 33 Restoring Factory Defaults To use the LCD display to restore factory default settings: 1.

4: Quick Setup SLB™ Branch Office Manager User Guide 34 4. To accept the defaults, select the Accept default Quick Setup settings checkbox in th

4: Quick Setup SLB™ Branch Office Manager User Guide 35 Eth 1 Settings Disabled: If selected, disables the network port. Default is Eth1 enabled.

4: Quick Setup SLB™ Branch Office Manager User Guide 36 Administrator Settings Sysadmin Password/ Retype Password To change the password (e.g., fro

4: Quick Setup SLB™ Branch Office Manager User Guide 37 Method #3 Quick Setup on the Command Line Interface If the SLB branch office manager does n

4: Quick Setup SLB™ Branch Office Manager User Guide 38 IP Address (if specifying) An IP address that will be unique and valid on your network and

4: Quick Setup SLB™ Branch Office Manager User Guide 39 Figure 4-3. Completed Quick Setup 5. To logout, type logout at the prompt and press Enter

SLB™ Branch Office Manager User Guide 4 Table of Contents Copyright & Trademark ___________________________________________________ 2 Open

SLB™ Branch Office Manager User Guide 40 5: Web and Command Line Interfaces The SLB branch office manager offers three interfaces for configur

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 41 Figure 5-1. Web Page Layout The web page has the following components:

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 42 Note: For specific instructions on completing the fields on the web pag

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 43 Command Line Interface A command line interface (CLI) is available for

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 44 Command Syntax Commands have the following format: <action> <c

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 45 Command Line Help For general Help and to display the commands to which

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 46 General CLI Commands The following commands relate to the CLI itself. T

SLB™ Branch Office Manager User Guide 47 6: Basic Parameters This chapter explains how to set the following basic configuration settings for t

6: Basic Parameters SLB™ Branch Office Manager User Guide 48 To enter settings for one or both network ports: 1. Click the Network tab and select

6: Basic Parameters SLB™ Branch Office Manager User Guide 49 Eth 1 and/or Eth 2 Settings Disabled: If selected, disables the network port. Defaults

SLB™ Branch Office Manager User Guide 5 Connecting Devices to Power Outlets ___________________________________________ 26 Connecting Devices to t

6: Basic Parameters SLB™ Branch Office Manager User Guide 50 Gateway Default IP address of the router for this network. If this has not been set m

6: Basic Parameters SLB™ Branch Office Manager User Guide 51 Hostname & Name Servers Hostname The default host name is slbXXXX, where XXXX is t

6: Basic Parameters SLB™ Branch Office Manager User Guide 52 Network Commands The following CLI commands correspond to the web page entries describ

6: Basic Parameters SLB™ Branch Office Manager User Guide 53 To view all network settings: show network all To view Ethernet port settings and coun

6: Basic Parameters SLB™ Branch Office Manager User Guide 54 Enabling IP Filters On the IP Filter page, you can enable all filters or disable all

6: Basic Parameters SLB™ Branch Office Manager User Guide 55 To add an IP filter: 1. On the IP Filter page, click the Add Ruleset button. The foll

6: Basic Parameters SLB™ Branch Office Manager User Guide 56 Port Range Enter a range of destination TCP or UDP port numbers to be tested. An entr

6: Basic Parameters SLB™ Branch Office Manager User Guide 57 To map a rule set to a network interface: 1. On the IP Filter page, select the IP fil

6: Basic Parameters SLB™ Branch Office Manager User Guide 58 Routing The SLB branch office manager allows you to define static routes and, for netw

6: Basic Parameters SLB™ Branch Office Manager User Guide 59 Note: To display the routing table, click the IP Routes Report link. The Status/Report

SLB™ Branch Office Manager User Guide 6 NFS and SMB/CIFS ____________________________________________________ 69 NFS and SMB/CIFS Commands ______

SLB™ Branch Office Manager User Guide 60 7: Services System Logging and Other Services Use the Services page to:  Configure the amount of

7: Services SLB™ Branch Office Manager User Guide 61 2. Enter the following settings: System Logging In the System Logging section, select one of

7: Services SLB™ Branch Office Manager User Guide 62 Remote Servers (#1 and #2) IP address of the remote server(s) where system logs are stored. T

7: Services SLB™ Branch Office Manager User Guide 63 Web Telnet Enables or disables the ability to access the SLB command Iine interface or device

7: Services SLB™ Branch Office Manager User Guide 64 SNMP Simple Network Management Protocol (SNMP) is a set of protocols for managing complex netw

7: Services SLB™ Branch Office Manager User Guide 65 NMS When SNMP is enabled, an NMS (Network Management System) acts as a central server, request

7: Services SLB™ Branch Office Manager User Guide 66 V3 Read-Only User User Name SNMP v3 is secure and requires user-based authorization to access

7: Services SLB™ Branch Office Manager User Guide 67 location <Physical Location> netlog <off|error|warning|info|debug> nms <IP Ad

7: Services SLB™ Branch Office Manager User Guide 68 To view current services: show services

7: Services SLB™ Branch Office Manager User Guide 69 NFS and SMB/CIFS Use the NFS & SMB/CIFS page if you want to save configuration and logging

SLB™ Branch Office Manager User Guide 7 Remote Access Server _____________________________________________________ 126 Reverse Terminal Server____

7: Services SLB™ Branch Office Manager User Guide 70 2. Enter the following for up to three directories: NFS Mounts Remote Directory The remote N

7: Services SLB™ Branch Office Manager User Guide 71 Network Interfaces Select the network ports from which the share can be seen. The default is f

7: Services SLB™ Branch Office Manager User Guide 72 To configure the SMB/CIFS share, which contains the system and device port logs: set cifs <

7: Services SLB™ Branch Office Manager User Guide 73 2. To manage a secure IT management device, click its IP Address. A separate browser page t

7: Services SLB™ Branch Office Manager User Guide 74 Above the table, the Telnet to the CLI Enabled and SSH to the CLI Enabled fields indicate whe

7: Services SLB™ Branch Office Manager User Guide 75 c) To open a Telnet session to a specific device port, click the Yes link in the Telnet Enabl

7: Services SLB™ Branch Office Manager User Guide 76 Secure Lantronix Network Commands The following commands for the command line interface corres

7: Services SLB™ Branch Office Manager User Guide 77 2. Enter the following: Change Date/Time Select the checkbox to manually enter the date and

7: Services SLB™ Branch Office Manager User Guide 78 Synchronize via Select one of the following: Broadcast from NTP Server: Enables the SLB branch

7: Services SLB™ Branch Office Manager User Guide 79 To synchronize the SLB branch office manager with a remote time server using NTP: set ntp <

SLB™ Branch Office Manager User Guide 8 13: Application Examples 206 Telnet/SSH to a Remote Device __________________________________________ 20

SLB™ Branch Office Manager User Guide 80 8: Device Ports This chapter describes how to configure and use an SLB branch office manager device p

8: Device Ports SLB™ Branch Office Manager User Guide 81 Permissions There are three types of permissions:  Direct (or data) mode: The user can i

8: Device Ports SLB™ Branch Office Manager User Guide 82 Current port numbering schemes for Telnet, SSH, and TCP ports display on the left. The l

8: Device Ports SLB™ Branch Office Manager User Guide 83 Starting SSH Port Each port is assigned a number for connecting via SSH. Enter a number (1

8: Device Ports SLB™ Branch Office Manager User Guide 84 To configure settings for all or a group of device ports: set deviceport global <one or

8: Device Ports SLB™ Branch Office Manager User Guide 85  Click the desired port number in the green bar (shown below) at the top of any page: T

8: Device Ports SLB™ Branch Office Manager User Guide 86 To enter device port settings: 1. Enter the following: Mode The status of the port; displ

8: Device Ports SLB™ Branch Office Manager User Guide 87 IP Address IP address used for this device port so a user can Telnet, SSH, or establish a

8: Device Ports SLB™ Branch Office Manager User Guide 88 Show Lines on Connecting If enabled, when the user either does a connect direct from the C

8: Device Ports SLB™ Branch Office Manager User Guide 89 Initialization Script Commands sent to configure the modem may have up to 100 characters.

SLB™ Branch Office Manager User Guide 9 Accessing the Bootloader _______________________________________________ 264 Bootload Commands___________

8: Device Ports SLB™ Branch Office Manager User Guide 90 Modem Settings: PPP Mode Negotiate IP Address If the SLB branch office manager and/or the

8: Device Ports SLB™ Branch Office Manager User Guide 91 Restart Delay The number of seconds after the timeout and before the SLB branch office man

8: Device Ports SLB™ Branch Office Manager User Guide 92 To open the Device Ports – SLP page: 1. In the Connected to field above the IP Settings s

8: Device Ports SLB™ Branch Office Manager User Guide 93 Infeed Status Click the link to view the status of the data the SLP power manager is recei

8: Device Ports SLB™ Branch Office Manager User Guide 94 Humidity (%) Current relative humidity on the device the sensor is monitoring. Low Humidit

8: Device Ports SLB™ Branch Office Manager User Guide 95 dialoutpassword <Password> dialbacknumber <usernumber|Phone Number> dodauth &l

8: Device Ports SLB™ Branch Office Manager User Guide 96 To view the settings for one or more device ports: show deviceport port <Device Port Li

8: Device Ports SLB™ Branch Office Manager User Guide 97 single outlet. slp envmon Displays the environmental status (e.g., temperature and humidit

8: Device Ports SLB™ Branch Office Manager User Guide 98 To connect to a device port to monitor and/or interact with it, or to establish an outboun

8: Device Ports SLB™ Branch Office Manager User Guide 99 only the oldest data is lost, and only in the amount of overrun (not in large blocks of me