Lantronix Computer Hardware 900-581 Manuale Utente Scaricare il pdf (Pagina 178)

5: Commands and Levels

<number> = maximum number of HTTP server log entries.

max timeout <seconds>

Sets the maximum time the HTTP server waits when receiving a

request.

<seconds> = maximum timeout value.

no clear counters

Restores the HTTP counters to the aggregate values.

no port

Disables the HTTP Server port.

no secure credentials

Clears the RSA/DSA certificate selection.

no secure port

Disables the HTTP Server SSL port.

port <number>

Sets the port number the HTTP server will use.

<number> = port number.

secure credentials <text>

Selects the RSA/DSA certificates by name for the HTTP server.

secure port <number>

Sets the port number the HTTP server will use over SSL.

<number> = port number.

secure protocols ssl3 disable

Disables the protocol.

secure protocols ssl3 enable

Enables the protocol.

secure protocols tls1.0 disable

Disables the protocol.

secure protocols tls1.0 enable

Enables the protocol.

secure protocols tls1.1 disable

Disables the protocol.

secure protocols tls1.1 enable

Enables the protocol.

show

Displays the current configuration.

show auth

Displays the HTTP server authentication settings.

show history

Displays the last 20 commands entered during the current CLI

session.

show log

Displays the HTTP server log.

show statistics

Displays the HTTP statistics.

state disable

Disables the HTTP server.

state enable

Enables the HTTP server.

write

Stores the current configuration in permanent memory.

icmp (config-icmp) level commands

clrscrn

Clears the screen.

exit

Exits to the configuration level.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current CLI

session.

state disable

Prevents ICMP packets from being sent or received.

state enable

Allows ICMP packets to be sent and received.

write

Stores the current configuration in permanent memory.

if 1 (config-if:eth0) level commands

bootp disable

Disables BOOTP.

bootp enable

Enables BOOTP.

clrscrn

Clears the screen.

default gateway <IP address>

Sets the configurable gateway IP address to the default value.

default mtu

Restores the default Maximum Transmission Unit (MTU) size.

dhcp client id <text>

Sets the DHCP client id.

dhcp disable

Disables DHCP.

dhcp enable

Enables DHCP.

PremierWave EN Command Reference 178

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 211 212

Commenti su questo manuale

Nessun commento

Lantronix Computer Hardware 900-581 Manuale Utente Pagina 178

Commenti su questo manuale

Prodotti e manuali riguardandi Networking Lantronix Computer Hardware 900-581